Broken bridge aluminum window and door equipment
Aluminum Door and Window Heavy Angle Assembly Machine
Cut two aluminum alloy window materials that have been cut into 45 degrees, use the corner code placed in the room, move the strike fork, squeeze and nail the two window materials, and form a 90 angle firmly.
The machine can be designed as a single-sided four-point collision according to the characteristics of the corner code, so the extrusion is stronger. Due to the increased size and impact, it is particularly suitable for the insulation profile frame material, fan material and door material, and the ultra-thick curtain wall material Group angle
The body is welded by 3mm steel plate to ensure rigidity
| Electric power || Adaptable material width || Rated oil pressure || Air pressure || Air consumption || Group angle travel || weight || Form factor |
| 380V 50Hz || 90mm || 16MPa || 0.5-0.8 MPa || 20L / min || 95mm || 450kg ||1200 * 1200 * 1400m|